sE Electronics DM1 Preamp

  • The DM1 provides 28dB gain boost to the microphone signal, which is indispensable on low output microphones such as Shure sm7b or certain ribbon microphones.
  • With a DM1 you don't have to turn the preamp in mixers or sound cards all the way up with these mics - it gives both better sound and less noise.
  • Normal dynamic mics also get a boost and better sound with a DM1.
  • Extremely low self-noise.
  • Perfect for long cable runs where signal loss may otherwise occur.
  • Gold-plated XLR connector ensures perfect connection.
  • Requires 48v phantom power.

sE Electronics DM1 Preamp/Mic Booster

14 anmeldelser

759 kr.

Prismatch
Bestillingsvare: Leveringstid 5-8 arbejdsdage
Afhent på lager 0,-
GLS - Pakkeshop 0,-
GLS - Erhvervslevering 59,-
GLS - Hjemmelevering 99,-
Danske Fragtmænd 299,-

Læs mere om levering

Levering fra 59,-  Se leveringsmuligheder

  • DM1 giver 28dB gain boost til mikrofonsignal, hvilket er uundværligt på mikrofoner med lavt output
  • Med en DM1 slipper man for at skrue preampen i mixere eller lydkort helt op
  • Normale dynamiske mikrofoner får også et boost og bedre lyd med en DM1
  • Ekstrem lav egenstøj


sE Electronics DM1 Preamp

  • The DM1 provides 28dB gain boost to the microphone signal, which is indispensable on low output microphones such as Shure sm7b or certain ribbon microphones.
  • With a DM1 you don't have to turn the preamp in mixers or sound cards all the way up with these mics - it gives both better sound and less noise.
  • Normal dynamic mics also get a boost and better sound with a DM1.
  • Extremely low self-noise.
  • Perfect for long cable runs where signal loss may otherwise occur.
  • Gold-plated XLR connector ensures perfect connection.
  • Requires 48v phantom power.


Model/Varenr.: EMN-1315910
Vægt (kg.) 0,1

SPECIFICATIONS

  • Frequency Range: 10 Hz - 120,000 Hz (-0.3 dB)
  • Gain: 28 dB (load 1kOhms)
  • Max output level (0.5% THD): 8.3 dBV (2.6 V)
  • Output noise level: 9 V (JIS-A)
  • Powering: 48 Volts according toIEC 61938
  • Electrical impedance: 135 Ohms
  • Recommended load impedance: >1k Ohms
  • Current consumption: 3.0 mA
  • Connectivity: 3-pin male/female XLR connector
  • Dimensions: Diameter: 19 mm Length: 95.5 mm
  • Weight: 80 g